Specifications

CHAPTER 2: S5U1C62000H PACKAGE SPECIFICATIONS
S5U1C62000H MANUAL EPSON 5
(S1C60/62 FAMILY IN-CIRCUIT EMULATOR)
2.5 Dip Switch Setting
The S5U1C62000H can be controlled by a host computer (NEC PC-98 Series, IBM PC/AT or its
compatible machine). To communicate between the S5U1C62000H and the host computer, it is necessary
to set the same baud rate and transfer data specifications in both. For the S5U1C62000H, the baud rate
can be set by a dip switch.
Figure 2.5.1 shows the settings with the dip switch.
1 2 3 4 Setting
ON OPEN OPEN OPEN 9600 bps, 8-bit character, 1 stop bit, no parity (factory setting)*1
OPEN ON OPEN ON 4800 bps, 8-bit character, 1 stop bit, no parity
ON ON OPEN OPEN 1200 bps, 8-bit character, 1 stop bit, no parity
Other settings Reserved for testing. (Do not set.)
∗1 Set the serial port of the host computer to 9,600 bps, 8-bit character, 1 stop bit and no parity as much as pos-
sible.
Fig. 2.5.1 Dip switch setting
1234
OPEN
ON