Product specifications

ManualsBrandsEpson ManualsComputer HardwareS5U1C62000A

S5U1C60N15E MANUAL EPSON 3

(EVALUATION BOARD FOR S1C60N15)

3 NAMES AND FUNCTIONS OF PARTS

3NAMES AND FUNCTIONS OF PARTS

This section describes the names and functions of the parts of the S5U1C60N15E.

3.1 Basic Functions

The S5U1C60N15E has the following basic functions:

■ Program execution (Run function)

Install the EPROM containing the application program and execute the program.

■ Interface with ICE

The S5U1C60N15E can interface with the ICE so that a higher level debugging environment may be

established.

■ Setting hardware options by installing function option and segment option ROMs

Hardware options, i.e., I/O ports and segments, can be specified by writing option data for the

function option created by the function option generator and the segment option created by the

segment option generator into EPROM, and installing the EPROM.

3.2 Functions of Parts

3.2.1 Front panel

▲ Position of pin 1

Fig. 3.2.1.1 Front panel

LCDEMU

••••••••••••••••••••••••••••

•••••••••••••••••••••••••••••••••

••••••••••••••••••••••

S5U1C60N15E1

S1C60N15 EVALUATION BOARD

EPSON

■ Connectors

• I/O #0, I/O #1

Connector for the I/O cable. The I/O cable

is used to connect the S5U1C60N15E to the

target system.

• LCD #0, LCD #1

Connector for the LCD cable. The LCD cable

is used to connect the S5U1C60N15E to the

target system. LCD #1 cannot be used.

•LCDEMU

Connector for the LCD emulator cable.

3.2.2 Rear panel

DC IN

+5V GND

POWER SW

••••••••••••••••••••••••••••

▲ Position of pin 1

Fig. 3.2.2.1 Rear panel

■ Switch

• POWER SW

This is a switch to turn on (I) or off (O) the

external power supply to S5U1C60N15E.

(Please turn off the POWER switch when

ICE is connected.)

■ Connectors

• DC IN 5 V

This is a connector with external power

supply source. The external power supply

should be in direct current of 5 V for 3 A or

more.

Note: Be sure to disconnect external power source

before connection with ICE, because power is

supplied from ICE when you connect

S5U1C60N15E to ICE.

• F1, F5

Connectors for the ICE interface cable.