Product specifications

S5U1C60N15E MANUAL EPSON 7

(EVALUATION BOARD FOR S1C60N15)

4 CABLE CONNECTION

This section describes how to connect the power cable to the S5U1C60N15E, and the

S5U1C60N15E to the ICE and the target system.

Note: Turn the power of all equipment off before connecting or disconnecting cables.

4.1 Connection to ICE

The S5U1C60N15E is connected to the ICE by connecting the two interface cables (F1 and F5). Use

S5U1C60N15E connectors F1 and F5 with the projections facing outwards. Use ICE connectors F1 and F5

with the projections facing inwards (cable side).

Figures 4.1.1 and 4.1.2 show the external view and connection diagram of the ICE interface cable.

2 1

50 49

2 1

50 49

ICE side S5U1C60N15E side

Fig. 4.1.1 External view of the ICE interface cable

ICE S5U1C60N15E

F1 connector→

Red mark

F5 connector→

←F1 connector

←F5 connector

Fig. 4.1.2 Connection diagram

Note: The S5U1C60N15E has an external power input connector for +5 V (VDD) and GND (VSS). Leave

these connectors unconnected when the S5U1C60N15E is connected to the ICE.