User`s manual

8: REGISTERS
S1D13504 SERIES HARDWARE FUNCTIONAL EPSON 1-69
SPECIFICATION (X19A-A-002-17)
bit 7 VRTC Polarity Select
For CRTs, this bit selects the polarity of the VRTC. When this bit = 1, the VRTC pulse is
active high. When this bit = 0, the VRTC pulse is active low.
bit 6 FPFRAME Polarity Select
This bit selects the polarity of the FPFRAME for TFT and passive LCD. When this bit =
1, the FPFRAME pulse is active high for TFT and active low for passive LCD. When this
bit = 0, the FRAME pulse is active low for TFT and active high for passive LCD.
bits 2–0 VRTC/FPFRAME Pulse Width Bits [2:0]
For CRTs and TFTs, these bits specify the pulse width of VRTC and FPFRAME respec-
tively. For passive LCDs, FPFRAME is automatically created and these bits have no
effect.
VRTC/FPFRAME pulse width (lines) = VRTC/FPFRAME Pulse Width Bits [2:0] + 1.
The maximum VRTC pulse width is 8 lines.
Note: This register must be programmed such that
(REG[0Ah] bits [5:0] + 1) ≥ (REG[0Bh] + 1) + (REG[0Ch] bits [2:0] + 1)
VRTC/FPFRAME Pulse Width Register
REG[0Ch] RW
VRTC Polar-
ity Select
FPFRAME
Polarity Select
n/a n/a n/a
VRTC/
FPFRAME
Pulse Width
Bit 2
VRTC/
FPFRAME
Pulse Width
Bit 1
VRTC/
FPFRAME
Pulse Width
Bit 0
Table 8-5 FPFRAME Polarity Selection
FPFRAME Polarity Select Passive LCD FPFRAME Polarity TFT FPFRAME Polarity
0 active high active low
1 active low active high