User`s manual

1: 13504CFG.EXE CONFIGURATION PROGRAM

UTILITIES (S19A-B-001-03) EPSON 3-11

Lookup Table (LUT)

LUT Setup

When Lookup Table is selected from the Device menu, the LUT Setup dialog box is displayed. To

select a LUT assignment, highlight it (in the example window below, “LUT Internal 4 Color” is

highlighted) and click OK. If the highlighted LUT assignment needs changes, click Edit and see the

next section “Edit LUT Setup.”

Whenever a LUT assignment is edited or selected in the LUT Setup dialog box, the setup is copied

to Current Conﬁguration. The editing is automatically performed on the current conﬁguration.

In addition to OK, Cancel, and Edit commands, a Help command is listed in the LUT setup win-

dows. In this version of 13504CFG, the Help ﬁles are unavailable.

Figure 1-20 13504CFG LUT Setup

Edit LUT Setup

When a selection is highlighted in the LUT Setup window and Edit is clicked, the Edit LUT Setup

window is displayed. The Edit LUT Setup window lists parameters which can be edited, as shown

below in Figure 1-21, “13504CFG Edit LUT Setup.” In this example window, “Bits Per Pixel: 2” is

highlighted.

Note: A future release of 13504CFG will enable components in the lookup table palette to be edited. (For

example, the red, green, and blue components of LUT palette entry 0Fh could be edited.)

Figure 1-21 13504CFG Edit LUT Setup

LUT Parameter Edit

When a selection is highlighted for editing in the Edit LUT Setup window and Edit is clicked, the

LUT Parameter Edit window displays for parameter editing. See Figure 1-22, “13504CFG LUT

Parameter Edit” below. In this example window, “Bits Per Pixel: 2” can be edited.

Figure 1-22 13504CFG LUT Parameter Edit