User`s manual

1: 13504CFG.EXE CONFIGURATION PROGRAM

3-8 EPSON UTILITIES (S19A-B-001-03)

CRT

CRT Setup

When CRT is selected from the Device menu, the CRT Setup window is displayed. To select a CRT

assignment, highlight it (in the example window below, “CRT 640 x 400 @ 85Hz, CLKI = 33.333

MHz” is highlighted) and click OK. If the highlighted CRT assignment needs changes, click Edit

and see the next section “Edit CRT Setup.”

Whenever a CRT assignment is edited or selected in the CRT Setup dialog box, the setup is copied to

Current Conﬁguration. The editing is automatically performed on the current conﬁguration.

In addition to OK, Cancel, and Edit commands, a Help command is listed in the CRT setup win-

dows. In this version of 13504CFG, the Help ﬁles are unavailable.

Figure 1-11 13504CFG CRT Setup

Edit CRT Setup

When a selection is highlighted in the CRT Setup window and Edit is clicked, the Edit CRT Setup

window is displayed. The Edit CRT Setup window lists parameters which can be edited, as shown

below in Figure 1-12, “13504CFG Edit CRT Setup.” In this example window, “Horiz Non-Display:

240 pixels” is highlighted.

Figure 1-12 13504CFG Edit CRT Setup

CRT Parameter Edit

When a selection is highlighted for editing in the Edit CRT Setup window and Edit is clicked, the

CRT Parameter Edit window displays for parameter editing. See Figure 1-13, “13504CFG CRT

Parameter Edit” below. In this example window, “Horiz Non-Display: 240 pixels” can be edited.

Figure 1-13 13504CFG CRT Parameter Edit