Product specifications

S5U1C6S3N2E2 MANUAL EPSON 9
(EVALUATION BOARD FOR S1C60N09/6S3N2/62N33)
4 CABLE CONNECTION
4.2 Power Cable Connection
When using the S5U1C6S3N2E2 on its own, it must be supplied with power (5 V DC, 3 A or more) from
an external source through the power cable.
When the S5U1C6S3N2E2 is connected to the ICE, the power is supplied by the ICE; therefore, the power
cable is not necessary. Disconnect the power cable if it is already connected.
Figure 4.2.1 shows the connection of the power cable pins.
-
+
Connect to the
power connector
of the S5U1C6S3N2E2
Connect to the
external power
supply
Black
Red
Fig. 4.2.1 Connection of power cable pins
In addition, the power can be supplied from the DC jack (DCIN). The AC adaptor provided with the ICE
can be used.
Note: Be sure to use only one power source either the AC adaptor or the power cable for independent
use of the S5U1C6S3N2E2. Do not connect the AC adaptor and the power cable when using the
S5U1C6S3N2E2 with the ICE.
4.3 Connection to Target System
The I/O #0 and LCD #0 connectors a re used to connect the S5U1C6S3N2E2 to the target system.
S5U1C6S3N2E2
I/O #0
Front
I/O cable
LCD cable
I/O
LCD
Target
system
connector
connector
LCD #0
Fig. 4.3.1 Connection of target system
Take the following precautions when connecting the S5U1C6S3N2E2 to the target system:
• Power is supplied to the S5U1C6S3N2E2, unlike the actual chip.
• Do not use pins that cannot be connected.