Specifications

1 COMPOSITION OF DEVELOPMENT SUPPORT TOOL
S5U1C60N03D MANUAL EPSON 1
(DEVELOPMENT SOFTWARE TOOL FOR S1C60N03)
1 COMPOSITION OF
DEVELOPMENT SUPPORT TOOL
Here we will explain the composition of the software for the development support tools, develop-
mental envilonment and how to generate the execution disk.
1.1 Configuration of S5U1C60N03D
The below software are included in the product of the S1C60N03 development support tool S5U1C60N03D.
1. Cross Assembler ASM6003 .......................................... Cross assembler for program preparation
2. Function Option Generator FOG6003 ........................... Function option data preparation program
3. Segment Option Generator SOG6003 .......................... Segment option data preparation program
4. ICE Control Software ICS6003...................................... ICE control program
5. Mask Data Checker MDC6003...................................... Mask data preparation program
1.2 Developmental Environment
The software product of the development support tool S5U1C60N03D operates on the following host
systems:
• IBM PC/AT (at least PC-DOS Ver. 2.0)
When developing the S1C60N03, the above-mentioned host computer, editor, P-ROM writer, printer, etc.
must be prepared by the user in addition to the development tool which is normally supported by Seiko
Epson.
Note The S5U1C60N03D system requires a host computer with a RAM capacity of about 140K bytes.
Since the ICE (S5U1C62000H) is connected to the host computer with a RS-232C serial interface,
adapter board for asynchronous communication will be required depending on the host computer
used.
Fig. 1.2.1 System configuration
Host computer
(IBM PC/AT)
Software tools
Hardware tools
Target board
PC-DOS
Editor
• P-ROM writer
• Printer
To be prepared by the user
S5U1C62000A
ICE Evaluation Board
S5U1C62N37E
S5U1C60N03D
ASM6003 ICS6003
FOG6003 MDC6003
SOG6003
S1C60N03 Development Tool
S5U1C62000H
RS-232C