Specifications

3 FUNCTION OPTION GENERATOR FOG6003
14 EPSON S5U1C60N03D MANUAL
(DEVELOPMENT SOFTWARE TOOL FOR S1C60N03)
*** OPTION NO.10 ***
--- R02, R03 OUTPUT SPECIFICATION ---
R02 OUTPUT SPECIFICATION 1. COMPLEMENTARY
2. PCH-OPENDRAIN
PLEASE SELECT NO.(1) ? 1
R03 OUTPUT SPECIFICATION 1. COMPLEMENTARY
2. PCH-OPENDRAIN
PLEASE SELECT NO.(1) ? 1
R02 OUTPUT SPECIFICATION 1. COMPLEMENTARY SELECTED
R03 OUTPUT SPECIFICATION 1. COMPLEMENTARY SELECTED
*** OPTION NO.9 ***
--- R01 SPECIFICATION ---
OUTPUT TYPE 1. D.C.
2. BZ OUTPUT
PLEASE SELECT NO.(1) ? 2
OUTPUT SPECIFICATION 1. COMPLEMENTARY
2. PCH-OPENDRAIN
PLEASE SELECT NO.(1) ? 1
OUTPUT TYPE 2. BZ OUTPUT SELECTED
OUTPUT SPECIFICATION 1. COMPLEMENTARY SELECTED
Select the output specification for the R01 terminal.
Either complementary output or Pch open drain
output may be selected.
When "D.C." (DC output) is selected, R01 becomes a
regular output port.
When "BZ OUTPUT" (buzzer output) is selected, by
writing "1" to the R01 register, clock with frequency
specified through the software is generated from the
R01 terminal.
• When DC output is selected
When the R01 register is set to "1", the R01
terminal output goes high (V
DD), and goes low
(VSS) when set to "0".
Output waveform is shown in Figure 3.3.10.
• When buzzer output is selected
When the R01 register is set to "1", 50% duty and
VDD–VSS amplitude square wave is generated at
the specified frequency by the software. When set
to "0", the R01 terminal goes low (VSS). The clock
phase when buzzer drive signal is output from the
R01 terminal is antiphase to that of the R00
terminal.
Output waveform is shown in Figure 3.3.11.
9 R01 specification
Fig. 3.3.10 Output waveform at DC output selection
Fig. 3.3.11 Output waveform at buzzer output selection
VDD
VSS
010
R01 output
R01 register
Buzzer output
R01 register 0 1 0
V
SS
VDD
Select the output specification for the R02 and R03
terminals.
Either complementary output or Pch open drain
output may be selected.
10 R02, R03 specification