Technical information

2. OVERVIEW
4 EPSON S1C33 Family In-Circuit Debugger
S5U1C33001H1400 Manual (Rev. 0.20)
• Power supply for flash programmer Provided (fixed at 7.0 V)
• Reset signal output to target system Provided
• Supported system I/O voltage 3.3 V, 1.8 V, input voltage (1.0 to 5.0 V) from target
system
• Connector for target system connection 4-pin, 10-pin, 30-pin *2
• Connector for flash programmer power supply 4-pin
*1 Frequency when I/O voltage = 3.3 V. The upper-limit frequency may be lower than the
specification value in certain cases, depending on ambient noise, temperature conditions,
product variations, etc.
*2 The product package does not include a 30-pin cable connector. Please contact us if you need
this cable connector.