Technical information

2. OVERVIEW
S1C33 Family In-Circuit Debugger EPSON 3
S5U1C33001H1400 Manual (Rev. 0.20)
2.1 Features
• C33 cores supported C33 STD core
C33 Mini core
C33 PE core
C33 ADV core
• Interface with the host PC USB 1.1
• Maximum data download speed About 65KB/s (Approx. 50 KB/s at 20 MHz)*1
• Mode supported by debugger ICD6 mode
• Program break function PC break function
Data break function
Forced break function
External forced break function (BRK IN)
Area break function
Bus break function
(logical or physical address is selectable)
Elapsed-time break function
• Trace function Normal PC trace function / normal bus trace
function
→ (1 Mclk after a go command or 1 Mclk before a
break command can be traced)
→ (Allows selection of logical or physical address
for bus trace)
Area PC trace function / area bus trace function
→ Trace of area between trace trigger 1 and trace
trigger 2 only
→ 1 Mclk can be traced
→ Allows selection of logical or physical address
for bus trace
Bus break trigger trace function
TRC IN pin input signal trace function
User logic signal trace function
• Measurement of the target program execution time
Measurement range of 3 us to 6515 hours
• Single-unit flash programmer function Provided
• Firmware update function Provided
• Clock frequency for communications with target system
4 kHz to 120 MHz