Specifications

2 C33 Macro Specifications
S1C33 ASIC DESIGN GUIDE
EPSON
17
EMBEDDED ARRAY S1X50000 SERIES
2.6 Electrical Characteristics
The C33 macro I/O cell library is designed based on the S1L50000 Series. Therefore, the electrical
characteristics are basically the same as those of the S1L50000 Series. However, since the C33 macros
include function blocks, such as CPU, DMA, PLL, oscillator, and A/D converter blocks, that have
unique and special characteristics, this manual stipulates the electrical characteristics for this product.
The C33 macros include I/O buffers, such the data bus and the I/O ports. The default I/O buffer setup
is based on that of the S1C33209 general-purpose product. Refer to section 2.3, "C33 Macro Pins" for
detailed information.
2.6.1 Absolute Maximum Ratings
1) Single power source
(V
SS
=0V)
*1: Voltages in the range -0.3 to +7.0 V are allowable for n-channel open-drain bidirectional buffers, IDC and IDH system
input buffers, and failsafe cells.
2) Dual power source
(V
SS
=0V)
*1: Voltages in the range -0.3 to +7.5 V are allowable for n-channel open-drain bidirectional buffers, LIDC and LIDH system
input buffers, and HIDC and HIDH system input buffers.
*2: Applies to 24 mA output current buffers.
Item Symbol Condition Rated value Unit
*
Supply voltage V
DD
-0.3 to +4.0 V
Input voltage V
I
-0.3 to V
DD
+0.5*
1
V
Output voltage V
O
-0.3 to V
DD
+0.5*
1
V
Output current per pin I
OUT
±30 mA
Analog power voltage AV
DD
-0.3 to +7.0 V
Analog input voltage AV
IN
-0.3 to AV
DD
+0.3 V
Storage temperature T
STG
-65 to +150 °C
Item Symbol Condition Rated value Unit
*
Supply voltage
HV
DD
-0.3 to +7.0 V
LV
DD
-0.3 to +4.0 V
Input voltage
HV
I
-0.3 to HV
DD
+0.5*
1
V
LV
I
-0.3 to V
DD
+0.5*
1
V
Output voltage
HV
O
-0.3 to HV
DD
+0.5*
1
V
LV
O
-0.3 to LV
DD
+0.5*
1
V
Output current per pin I
OUT
±30(±50*
2
) mA
Storage temperature T
STG
-65 to +150 °C