User`s guide

Printing From a Memory Card 95
Note:
It won’t be possible to insert the card fully; this is normal.
The memory card light flashes, then turns green.
Caution:
Do not insert more than one card into a shared memory card slot.
After the RX500 reads the card, you
see this message on the LCD screen if
it finds any images:
3. Load the type of paper you want to
print on. Insert it against the right
edge guide beneath the tab, and slide
the left edge guide lightly against it.
Note:
Remember to load the paper short edge first and printable (whiter or brighter)
side up.
4. Press the Memory Card button to enter memory card mode.
5. Using the number keypad, enter the number of copies of each photo you want
to print (up to 99), and press
OK.
Note:
The number of copies is how many times each photo prints, not the number of
pages. For example, if you’re using a layout that fits 8 photos and you select 3
copies, you will get one sheet with 3 photos printed on it.
Memory card light
Found Images. . .
Total XXX
OK
Always load paper
short edge first