User`s guide

Printing From a Memory Card 93
4. Make sure
Scan Index appears on the LCD screen, then press OK. (If it
doesn’t appear, press the
Memory Card button, then press the top left button
on the LCD screen until you see
Scan Index and press OK.)
5. Place the index form face down in the upper left corner of the scanner glass,
about 0.1 inch from the edges.
6. Close the scanner lid.
7. Press the x Color button. The form is scanned and your photos are
automatically printed.
Selecting Photos Using the Buttons on the RX500
1. Once you’ve printed the index form, identify a photo or range of consecutive
photos you want to print.
2. Load the type of paper you want to
print on. Insert it against the right
edge guide beneath the tab, and slide
the left edge guide lightly against it.
Note:
Remember to load the paper short
edge first and printable (whiter or
brighter) side up.
3. Make sure you’re in memory card
mode (if necessary, press the
Memory Card button).
Orient the index form
as shown, or the
RX500 can’t read it
Move the form
about 0.1 inch
from the edges
Always load paper
short edge first