User`s guide

Printing From a Memory Card 91
7. Disconnect the RX500 from your computer or turn your computer off.
Otherwise, photos on your card will be automatically copied to your
computer if you’ve set up your RX500 as an external card reader (see page 85).
8. Open the memory card cover:
9. Make sure the memory card light
(next to the memory card slots) is
off and that no cards are in any of
the slots. Then insert a card into
the correct slot (see page 84 to
identify the slot you need).
Note:
It won’t be possible to insert the card fully; this is normal.
The memory card light flashes, then turns green.
Caution:
Do not insert more than one card into a shared memory card slot.
After the RX500 reads the card, you
see this message on the LCD screen if
it finds any images:
10. Press the
Memory Card button on
the control panel to enter memory
card mode.
Print Index appears on
the LCD screen.
11. Press the
OK button.
12. Press the x
Color button to print the index. After the index form prints,
Scan Index appears on the LCD screen.
13. Leave your memory card in the memory card slot so that you can print from
it. Continue with the next section.
Memory card
cover
Memory card light
Found Images. . .
Total XXX OK