User`s guide

88 Using Memory Cards
5. Click the Open button. Then close the Image Capture utility.
6. Make sure your RX500 is turned on and connected to your Macintosh.
7. Open the memory card cover:
8. Make sure the memory card light
(next to the memory card slots) is
off and that no cards are in any of
the slots. Then insert a card into the
correct slot (see page 84 to identify
the slot you need).
Note:
It won’t be possible to insert the card fully; this is normal.
9. The Epson PhotoStarter setup assistant opens. Follow the instructions on the
screen to change any settings from the defaults and complete the setup steps.
If you don’t change any settings in the setup assistant, PhotoStarter
automatically copies the images on your memory card to the
Photos folder
on your desktop and opens PhotoImpression. Each time you insert a card in
the RX500, PhotoStarter copies your images to the same location, and
PhotoImpression or the application you chose in the setup process opens. If
you chose not to copy images automatically to your Macintosh, you can still
copy images to and from the
EPSON_DSC icon on your desktop.
Memory card
cover