User`s guide

Copying Photos to Your Computer 85
The memory card light flashes, then turns green.
Caution:
Do not insert more than one card into a shared memory card slot.
After the RX500 reads the card, you
see this message on the LCD screen if
it finds any images:
5. Press the bottom right button to
choose
OK.
To remove the card, pull it straight out of its slot. On a Macintosh, drag the card
icon on your desktop to the icon before removing the card.
Copying Photos to Your Computer
You can use your RX500 as an external card reader, letting you copy images from
the memory card to your computer, or vice versa.
You can set up your computer so that every time you insert a memory card, it
automatically copies all images from the card to a specific location on your hard
drive and opens PhotoImpression or another photo-editing application, such as
Photoshop.
®
If you don’t want to do this, you can set it up so that nothing happens
when you insert a card. Since the memory card appears as a removable hard drive
(
EPSON_DSC) on your computer, you can still copy images to or from this icon.
Note:
If you want to copy images to the memory card, make sure the card’s write-protect tab,
if it has one, is set to allow writing to the card.
Memory card light
Found Images. . .
Total XXX
OK