User`s guide

Printing on a Macintosh 43
Printing on a Macintosh
After you create a document in a software program, follow the steps in one of these
sections to print it using basic print settings:
■ For Macintosh OS X, see the next section.
■ For Macintosh OS 8.6 to 9.x, see page 47.
Printing With OS X
If you’re using an OS X-compatible printing application, follow the steps below to
print your document. (If you’re using an application that’s compatible only with
Macintosh Classic mode, follow the steps on page 47 instead.)
Before you begin, make sure you installed the software and added the RX500 to
Print Center or the Printer Setup Utility, as described on the Start Here poster.
1. From the File menu, select
Page Setup. You see a window like this one:
2. Select
Stylus Photo RX500 from the Format for list.
3. Select your
Paper Size.
Note:
When printing using a custom paper size, make sure the selected size matches the
paper you loaded and is within the printable area for the printer. For example, never
choose a size wider than the printer’s sheet feeder or longer than the paper. (See
the on-screen Reference Guide for paper size specifications.)
4. Click OK to close the Page Setup window.
Select Stylus
Photo RX500
Select your document
or image orientation
Select your Paper Size