User`s guide

118 Maintaining the RX500
Transporting the RX500
If you move your RX500 some distance, you need to prepare it for transportation
in its original box or one of a similar size.
Caution:
To avoid damage, always leave the ink cartridges installed when transporting the
RX500. Never transport or store the printer on its side or in a tilted or upside-down
position.
1. Press the P On button to turn on the RX500. Wait until the scanner carriage
moves to the home position (toward the left side) and the print head locks in
the far right position. Then turn off the RX500.
2. Open the scanner lid and slide the transportation lock to the locked
position. Close the scanner lid.
3. Unplug the power cord from the electrical outlet. Then disconnect the USB
cable from your computer.
4. Disconnect the TPU cable from the
TPU connector on the back of the
RX500.
5. Remove any paper from the sheet feeder and output tray, then remove the
paper support and feeder guard.
6. Close the output tray.
7. Lift up the scanner unit.