User`s guide

112 Maintaining the RX500
When you need new ink cartridges, contact your dealer. You can also call the
Epson Store
SM
at [phone] or visit www.epsonstore.com (U.S. sales only).
In Canada, please call [phone] for dealer referral.
Caution:
To ensure good results, use genuine Epson ink cartridges and do not refill them. Other
products may cause damage to your RX500 not covered by Epson’s warranty.
You can’t print if an ink cartridge is empty. Leave the empty cartridge installed in the
RX500 until you have a replacement. Otherwise the ink remaining in the print head
nozzles may dry out.
Warning:
Keep ink cartridges out of the reach of children. If ink gets on your hands, wash them
thoroughly with soap and water. If ink gets in your eyes, flush them thoroughly with
water.
Follow these steps to replace an ink cartridge:
1. If an ink cartridge is empty:
Look at the LCD screen to see which cartridge is empty, then press the
x
Color button.
If an ink cartridge is low:
Press the
Setup button to enter setup mode, then press the upper left button
next to the LCD screen until
Replace Ink is displayed. Then press the
x
Color button.
2. When you see
Open the scanner on the LCD screen, use the side grips to
open the scanner unit, as shown, making sure to keep the scanner lid closed
on top.