User`s guide

106 Using Memory Cards
The memory card light flashes, then turns green.
Caution:
Do not insert more than one card into a shared memory card slot.
Note:
If the card is not properly formatted, you see a message on the LCD screen. Press
the button indicated on the screen to format the card. Any data stored on the card
will be erased.
4. Open the scanner lid.
5. Place your photo face down on the glass in the upper left corner. Move your
photo about 0.1 inch from the top and side edge so the entire photo is
scanned.
6. Close the scanner lid.
7. Press the
Scan button to enter scan mode.
You see an LCD screen similar to
the one to the right. If necessary,
press the upper left button until
To Photo Card appears.
8. Press the
OK button.
Note:
You can also scan to your computer or create an e-mail with the scanned image
attached. See the instructions beginning on page 79.
Memory card light
Move the
photo in about
0.1 inch from
the edges
Orient the
photo as
shown
1.To Photo Card
OK
Press until you see To Photo Card