User`s guide

Scanning a Photo to a Memory Card 105
Hi Speed
This setting allows you to perform bidirectional printing for greater speed.
1. Press the
Menu button, then press the
bottom left button (next to
Resolution)
until you see
Hi Speed on the screen.
2. Press
OK. Then press the bottom left
button to choose from these settings:
Scanning a Photo to a Memory Card
Follow these steps to scan an image to a memory card and save it in JPEG format:
1. Make sure your RX500 is not connected to your computer or your computer
is turned off.
2. Open the memory card cover:
3. Make sure the memory card light
(next to the memory card slots) is
off and that no cards are in any of
the slots. Then insert a card into
the correct slot (see page 84 to
identify the slot you need).
Note:
It won’t be possible to insert the card fully; this is normal.
Setting Results
On Increases print speed by enabling bidirectional
printing
Off Bidirectional printing is not enabled, so printing is
slower
Detail Setting
13.Hi Speed
Press until you see Hi Speed
Memory card
cover