User manual

TB-7Z-020-EMC Hardware User Manual
28
Rev.1.03
7.12. Mictor 38
The TB-7Z-020-EMC board includes ARM Debugger Interface Connector (Mictor 38). It is intended for
high-speed trace capture of up to 16 bits of trace data and status/sync signals. It can also be used to
connect to the debug signals of the target.
The Mictor 38 interface is shown in Figure 7-23.
TRACEPKT[15:0]
TRACECLK , TRACESYNC
PIPESTAT[2:0] , EXTTRIG
DBGRQ , DBGACK
PS_JTAG_TDI
PS_JTAG_TMS
PS_JTAG_TCK
PS_JTAG_TDO
ZYNQ
XC7Z020-1CLG484
PS Bank501
PS_SRST_B
PS Bank500
PL Bank13
Mictor 38
Connector
2-5767004-2
Figure 7-23 MICTOR 38 Connection
Table 7-12 JTAG Mode Setting for Mictor-38
No.
Boot Device
J7
2
Cascade
2-3