Operation Manual

Problem Solving
Check each item.
Screen Problem Message contents Solution
Watch Data List
Upload
Watch Settings
AGPS
Communications to
the watch was cut off.
Communication with the
watch has been
disconnected.
Acquire the list again.
Try the following and tap the
menu item again.
❏ Charge the watch
❏ Establish the
communications with
the watch and keep close
to you
❏ Turn Bluetooth ON in the
iOS
If the problem persists even
after you have tried the
above, unpair and pair the
devices again, and then tap
the menu
U “Unpairing Devices” on
page 49
Watch Data List
Watch Settings
AGPS
Cannot communicate
with the watch.
Cannot detect the watch.
Turn on Bluetooth in the
settings on your iOS device,
start Bluetooth
communication on the
watch, and then access again.
Try the following and tap the
menu item again.
❏ Charge the watch
❏ Establish the
communications with
the watch and keep close
to you
❏ Turn Bluetooth ON in the
iOS
If the problem persists even
after you have tried the
above, unpair and pair the
devices again, and then tap
the menu
U “Unpairing Devices” on
page 49
Cannot access a watch that
has been paired.
Try accessing again.
Cannot read information on
the paired watch.
Upload again.
Cannot access the watch.
Turn on Bluetooth in the
settings on your iOS device,
and then acquire the list
again.
The watch is not responding.
Start Bluetooth
communication on the
watch, and then acquire the
list again.
Smartphone User's Guide
Troubleshooting
47