Specifications

Chapter 4 TM Flash Logo Setup Utility
91
4
5
Select the [Preview] tab. Make the following settings on the tab.
6
Select the [Logo Upload] tab. Make the following settings and start to
upload the logo file to the TM printer.
Setting Description
Selection Logo Files Displays a list of logo files selected in the [Bitmap Selection] tab.
Select a desired logo file in the list to preview it in the preview window on the
right.
Preview Previews a logo file selected in the "Selection Logo Files" box.
Setting Description
Selection Logo Files Select a logo file to be saved to the TM printer in this box.
APD Control Font Specify the destination to where the logo file is saved.
The destination NV memory address of the TM printer is specified using a
control font that is used for specifying the logo file to print.
Device Starts to upload the selected logo file to the TM printer.
Preview
Selection Logo Files
Preview
Logo Upload
Selection Logo Files
APD Control Font
Device