Specifications

Chapter 3 Reference
85
3
Rotation
Specifies the print direction of 2D-Code. When other than
"Normal" is selected in the Rotation setting, the following
message is displayed: "<Print all text as graphics image> will
be automatically set to yes."
When other than "Normal" is specified for the Rotation setting
both in the [Layout] tab and the [2D-Code] - [Advanced
settings], the both settings are applied to the printed 2D-
Code at a time.
Normal Prints the 2D-Code without rotating it.
Rotate by 90 Degrees
Rotates the 2D-Code to print it. The whole print data is
printed as a graphics image, therefore, the Device fonts,
control font, and controlA font cannot be used.
Rotate by 180 Degrees
Rotate by 270 Degrees
Hex Input Mode
Allows the 2D-Code characters to be entered in binary.
Ex : "00010203" J 0x00 0x01 0x02 0x03
Add Quiet Zone
Check this box to add a quiet zone, the blank margin
around the 2D-Code, required to be properly read by a
barcode reader. The quiet zone is added without changing
the 2D-Code position.
Test
Printing
Prints a set PDF417 as test printing.
Test Data Inputs data for test printing.
Run Prints input data.
Setting Description