Specifications

82
Rotation
Specifies the print direction of barcode. When other than
"Normal" is selected in the Rotation setting, the following
message is displayed: "<Print all text as graphics image> will be
automatically set to yes."
When other than "Normal" is specified for the Rotation setting
both in the [Layout] tab and the [Barcode] - [Advanced
settings], the both settings are applied to the printed barcode
at a time.
Normal Prints the barcode without rotating it.
Rotate by 90
Degrees
Rotates the barcode to print it. The whole print data is printed as
a graphics image, therefore, the Device fonts, control font, and
controlA font cannot be used.
Rotate by 180
Degrees
Rotate by 270
Degrees
Hex lnput Mode
Allows the barcode characters to be entered in binary.
Ex : "00010203" J 0x00 0x01 0x02 0x03
Add Quiet Zone
Check this box to add a quiet zone, the blank margin on either
side of a barcode, required to be properly read by a barcode
reader. The quiet zone is added without changing the barcode
position.
Test
Printing
Prints a set barcode as test printing.
Test Data Inputs data for test printing.
Run Prints input data.
Setting Description