Specifications

Chapter 3 Reference
63
3
Size
Configures the size of Water Mark in a percentage of print area. The
percentage can be specified within the range of 0 to 100. However, if you
select "0", the Water Mark becomes too small and cannot be printed.
When "100" is specified, the Water Mark will be enlarged or reduced so that it
fits in the print area of the selected paper. However, depending on the
horizontal to vertical ratio of the Water Mark image, such as a vertically long
image, some portions of the image may exceed the print area and may not
be printed. The length of paper is not changed according to the length of
the Water Mark image.
Density
Configures the density of the Water Mark. The density can be adjusted in the
"Light" to "Dark" range.
Setting Description