Specifications

62
Water Mark
AllowsyoutosetabitmapfiletobeusedasaWaterMark.Thepreviewwindowshowsthe
specifiedWaterMarkimagereflectingtheselectedPrintPosition,Size,andDensity.
Setting Description
Water Mark
Tick the checkbox to set a Water Mark.
The following message is displayed; "<Print all text as graphics image> will be
automatically set to yes.". When Water Mark is enabled, the print image is
printed as a graphics image, therefore, the Device font is replaced with
TrueType font, and control font and controlA font cannot be used.
Bitmap Specifies a bitmap file to be used as a Water Mark.
Print Position
Select a desired print position from the pull-down menu.
The following position settings are provided: Top Left/Top Center/Top Right/
Middle Left/Middle Center/Middle Right/Bottom Left/Bottom Center/Bottom
Right/Tiled