Specifications
60
Adjust Print Position
Allows you to fine adjust the print start position. You can adjust the
print position without making changes in margins and print area
defined by the applications. This also can be used for changing
print position of rotated or reduced image.
This adjustment is limited within the printable area of the selected
[Paper Size]. If you change the [Paper Size] to the smaller one
without changing the print position setting, causing the position
settings to fall outside the new printable area, the settings will be
automatically changed so that the print image fits inside the new
printable area.
The print position of the logo registered in the TM printer (NV
Graphics) will not be changed.
Vertical Direction
This adjusts the print position in horizontal direction.
Enter a negative value to make the top margin smaller, or positive
value to make it larger.
Horizontal Direction
This adjusts the print position in vertical direction.
Enter a negative value to make the left margin smaller, or positive
value to make it larger.
Rotate
This configures print direction.
The graphic shown on the right changes according to the selected
setting. Select a desired setting for rotating a print image. When
other than [Normal] is selected, the following message is displayed;
"<Print all text as graphics image> will be automatically set to yes.
<Paper Conservation> will be automatically changed.".
Normal This prints in normal direction. This is the default.
Rotate by 90 Degrees
This rotates a print image as specified.
The rotated print image is printed as a graphics image, therefore,
the Device fonts, control font, and controlA font cannot be used.
Rotate by 180 Degrees
Rotate by 270 Degrees
Reduced Size Print
This configures reduced print, [Fit to Printable Width] or [Custom].
When [Reduced Print] is selected, the following message is
displayed; "<Print all text as graphics image> will be automatically
set to yes.". The reduced print image is printed as a graphics
image, therefore, the Device fonts, control font, and controlA font
cannot be used.
When Logic paper size is selected, deselecting [Reduced Print]
automatically changes the paper size to Paper size or User Defined
Paper Size.
Reduced Print setting does not change the size of Barcode and
2D-Code.
Fit to Printable Width
A print image is automatically scaled down so that it fits inside the
width of the paper loaded on the TM printer.
Custom You can manually set the reduction percentage.
Setting Description