Specifications

Chapter 2 Using the APD
35
2
Paper Feed and Paper Cut
Therearetwomethodsforcontrollingthepapercut.
•ConfiguretheAPDtofeedandcutthepaperautomaticallyattheendofeachprinting.
Thismethodisvalidevenwhen[Printalltextasgraphicsimage]isset.
•CutthepaperusingControlFontintheprogram.
Setting paper cut with the printer driver
SelecttheDocumentSettingstabfromPrintingPreferences.
Makethefollowingsettings.SeeʺPaperSourceʺonpage68fordetails.
Makingthissettingcontrolspaperfeedandpapercutwhenprintingadocument.
When using Control Font, you cannot use it in combination with a <Print all text as graphics
image> setting such as Rotated Printing/Water Mark/Scale-down Printing.
Setting Description
Setting item Select Paper Source
Paper Source Select whether to feed paper per job (document) or page, and
whether to cut paper with the auto-cutter or not.
Document Settings tab
Setting item
Paper Source