Specifications

Chapter 2 Using the APD
31
2
Background printing
UseWaterMarktoprintbackground.AbitmapfileisnecessaryforWaterMarksetting.
Water Mark setting
SelecttheWaterMarktabfromPrintingPreferences.
Makethefollowingsettings.SeeʺWaterMarkʺonpage62fordetails.
• You may not be able to print a Water Mark depending on the application.
• When the printing orientation setting is other than standard, since [Print all text as
graphics] under Document Settings is "Yes" you cannot use Device Font, Control Font
control (logo printing using NV memory, etc.) or ControlA Font.
• Since a large volume of data is sent to the TM printer for Water Mark printing, in the case
of serial connection printing time is longer compared with other interfaces.
Setting Description
Water Mark
Check to print Water Mark. When checked, [Print all text as
graphics] under Document Settings is automatically set to "Yes".
Bitmap Specifies the background bit map data file.
Print Position Make the following settings.
Size Configures the size of the Water Mark.
Density Configures the density of the Water Mark.
Bitmap
Water Mark tab
Print Position
Size
Density
Water Mark