Specifications

26
Printing Using a Device Font
SelecttheTrueTypefonttobesubstituted.
FontSubstitutionSettings
Fortheprintdata,
specifyaTrueTypefontandsize.
ThatTrueTypefontforwhich
substitutionhasbeenspecifiedwill
alwaysbeoutputasthedevicefont.
Otherwise,therefore,alwaysselect
anotherTrueTypefont.
Makethe[PrinterSettings]‐TrueType
FontSubstitutionsettings.
(SeeʺSubstitutingFontsʺonpage24.)
Specifyingdevice
fontsizeusingthe
specifiedPoint.
Example:Whenyouwanttoprint
FontA11withTM‐T81,specifya9.5
Point.
SpecifyPointwithreferencetothe
following.
•Specify a point size shown on the
[Font]tab.
•You can print only device fonts with
the same horizontal and vertical
dimensionsasFontA11/22,
etc.
•You cannot print device fonts with
different horizontal and vertical
dimensionsasFontA12/22,etc.
Andyoucannotprintasmallerpoint
than the smallest device font
(Example:Font11).
•When specifying a point that is
betweendevicefontsordifferentsizes
(FontA11,FontA22,etc.),thesmaller
ofthetwodevice
fontsisprinted.
Example:When specifying 12 point
with TM‐T81ʹs FontA, FontA11 is
printed.
Print