Specifications
22
Printing Method
Specify2D‐CodeFont,specifiedPoint(checkwith[2D‐Code]tab)andlanguageinprintdata.
Points
The 2D-Code font size is displayed. When printing, specify this value
from the application side.
Alias
You can make optional settings. You can specify Alias during
programming.
Barcode type Sets the 2D-Code type. (CPU-A, JAN8([EAN], ITF, etc.)
Advanced setting
Sets the 2D-Code size and Error Correction Level, etc. Setting contents
differ with the
2D-Code type.
Rotation Sets whether to independently rotate 2D-Code.
Hex Input Mode Allows the 2D-Code characters to be entered in binary.
Add Quiet Zone
C h e c k t h i s b o x t o a d d a q u i e t z o n e , t h e b l a n k ma rg i n o n e i t h e r s i d e o f a
2D-Code required to be properly read.
When Rotate is set with the [Layout] tab, the printing direction of the barcode matches
[Layout] tab Rotate and the Rotation of [Barcode]-[Advanced settings] printing direction.
Ex: When specifying [Rotate by 90 degrees] with [Layout] Rotate and [Rotate by 90
degrees] with [2D-Code] Rotation, the printing direction is turned through 180
degrees.
• 2D-Code Font Points determined. Check with Printing Preferences - [2D-Code]. When
specifying a value other than this, the 2D-Code is not printed.
• Since the dot resolution differs with the TM printer model, the size of the 2D-Code to be
printed varies, even if the same value is set.
Setting Description