Specifications

Chapter 2 Using the APD
21
2
Printing a 2D-Code
APDhasa2D‐Codefont.Therefore,youcanprint2D‐Codewithoutcreating2D‐Codeonthe
applicationside.
The2D‐Codefontallowsregistrationof2D‐Codetypeandsizeproperties.
Uptoeighttypes(2D‐Code1~8)ofsettingcanberegisteredusingtheAPD.You
canmakefine
settingsof2D‐Codeatonetime,andalsoeasilychangethesettings.
The2D‐CodesyoucanprintdifferwitheachTMprinter.SeeʺPrinterSpecificationʺfordetails.
Setting the 2D-Code Font
Selectthe2D‐CodetabfromPrintingPreferences.
Makethefollowingsettings.Seeʺ2D‐Codeʺonpage83fordetails.
When used in combination with Rotation, set a slow Printing Speed with the [Document
Settings] tab. It may not be possible to print clearly when the printing speed is high.
Setting Description
Font Name
You can set the 2D-Code font from the 8 types of 2D-Code(1 ~ 8).
When programming, specify the font using "Font Name" or "Alias".
2D-Code types
Alias
Open the
Advanced settings
Advanced setting
Rotation
Quiet Zone
2D-Code tab
Font Name
Points