Specifications
Chapter 2 Using the APD
19
2
Printing Method
SpecifyBarcodeFont,specifiedPoint(checkwith[Barcode]tab)andlanguageinprintdata.
Element
Determines the Barcode size. Specifies the finest Element width and
height. Units are the smallest dot of the TM print e r. T h i s r e s u l t d e t e r m i n e s
the Barcode font Point.
HRI characters Sets with/without HRI characters, position and font.
Rotation Sets whether to independently rotate Barcode.
Hex Input Mode Allows the Barcode characters to be entered in binary.
Add Quiet Zone
The blank margin on either side of a Barcode required in order to read
the Barcode.
When Rotate is set with the [Layout] tab, the printing direction of the barcode matches
[Layout] tab Rotate and the Rotation of [Barcode]-[Advanced settings] printing direction.
Ex: When specifying [Rotate by 90 degrees] with [Layout] Rotate and [Rotate by 90
degrees] with [Barcode] Rotation, the printing direction is turned through 180 degrees.
• Barcode Font Points determined. Check with Printing Preferences - [Barcode]. When
specifying a value other than this, the Barcode is not printed.
• Since the dot resolution differs with the TM printer model, the size of the barcode to be
printed varies, even if the same value is set.
The character design and size displayed on the application screen are a little different from
actual printing results.
Setting Description