Service manual

EPSON Stylus Photo R340/350 Revision A
Disassembly and Assembly Disassembly 92
 Illustration (2)
Figure 2-92. Removing the Front Paper Guide and EJ Roller Assy. (2)
7. Remove the Left Push Up Plate Extension Spring from the tabs ( ) of the
Left EJ Frame Shaft Guide and the Main Frame.
8. Release the five tabs (three on the left ( ), two on the right ( )) that secure
the Left/Right EJ Frame Shaft Guides, and remove them.
9. Remove the Right Push Up Plate Extension Spring from the two tabs ( ) of
the Right EJ Frame Shaft Guide.
10. Release the left tab ( ) that secures the Front Paper Guide, and release the
front tab ( ) to remove the Front Paper Guide.
11. Remove the Front Paper Guide Porous Pad, Front Paper Guide Left Porous
Pad, and the three Front Paper Guide Support Porous Pads from the Front
Paper Guide. See Section on page 52.
Right EJ Frame Shaft Guide
Hooked Tabs
Right Push Up Plate Extension Spring
Left EJ Frame
Shaft Guide
Left Push Up Plate
Extension Spring
Hooked Tabs
Left Side of
the Printer
Hooked Tabs
Left Side of
the Printer
Hooked
Tabs
Right Side of
the Printer
Front Paper Guide
PF Roller Assy.
EJ Roller Assy.
Hooked Tab
Hooked Tab
C A U T I O N
Beware of the following items when performing the next step.
 Do not touch the Front Paper Guide Porous Pad and the Front
Paper Guide Left Porous Pad.
 Be careful not to damage the ribs on the Front Paper Guide.
 Exercise care not to scratch the surface of the PF Roller Assy.