Service manual

EPSON Stylus Photo R340/350 Revision A
Disassembly and Assembly Disassembly 77
2.3.19 Removing the APG Assy.
 Illustration
Figure 2-66. Removing the APG Assy.
 Parts/Components must be removed to remove the APG Assy.
Paper Support Assy., Left Housing, Right Housing,
Panel Board Assy. (Panel Board and LCD Module), Upper Housing,
Rear Housing, Main Board Assy., ASF Assy., Shaft Assy. Holder,
Printer Mechanism
 Disassembly Procedure
1. Remove the screw ( ) that secures the APG Assy., and remove it.
APG Assy.
C.B.S 3x6 (6-8kgf.cm)
Left Rear Side of the Printer
Reinstall the APG Assy. in the order given below.
1. Set the two tabs ( ) into the corresponding holes on the Main
Frame.
2. Insert the arm into the slit of the Main Frame.
3. Set the two guide pins ( ) into the positioning holes.
Figure 2-67. Reinstalling the APG Assy.
Arm
Hooked Tabs
Guide Pins