Service manual

EPSON Stylus Photo R340/350 Revision A

Disassembly and Assembly Disassembly 59

 Illustration

Figure 2-32. Removing the ASF Assy. (2)

4. Open the Hopper and remove the Compression Spring 2.51.

5. Bow the Paper Back Lever to release the both ends of it from the two guide

pins ( ) in the order of and , and remove the Paper Back Lever

together with the Compression Spring 0.31.

6. Remove the two screws ( ) that secure the ASF Frame Support Plate and

remove it.

7. Release the Extension Spring 0.45 from the two tabs ( ) and remove the

spring.

8. Open the Retard Roller Assy. and release it from the two guide pins ( ) and

remove the Retard Roller Assy.

Compression Spring 2.51

Hopper

Paper Back Lever

Guide

Compression Spring 0.31

ASF Frame

Hooked

Tabs

C.B.P 3x6 (3-5kgf.cm)

ASF Frame

Support Plate

Extension Spring 0.45

Guide

Retard Roller Assy.

Guide Pins

C A U T I O N

When performing the next step, be careful not to touch the Hopper

Pad with bare hands.

Figure 2-33. Handling the Hopper Pad

C A U T I O N

When performing the next step, be careful not to lose the

Compression Spring 0.31.

Hopper Pad

1 2