Service manual

EPSON Stylus Photo R340/350 Revision A

Disassembly and Assembly Disassembly 58

2.3.10 Removing the ASF Assy.

 Illustration

Figure 2-31. Removing the ASF Assy.

 Parts/Components must be removed to remove the ASF Assy.

Paper Support Assy., Left Housing, Right Housing,

Panel Board Assy. (Panel Board and LCD Module), Upper Housing,

Rear Housing, Main Board Assy.

 Disassembly Procedure

1. Remove the three Main Frame Screws ( ) that secure the connector cables

of the PF Motor and the PG Motor, and release the cables from the groove.

2. Remove the two pieces of acetate tape that secures the connector cables of the

PF Motor and the PG Motor and release the cables from the hooked tab ( )

of the ASF Assy.

3. Remove the five screws ( ) that secure the ASF Assy., and remove it toward

the rear of the printer.

ASF Assy.

Connector Cable

Main Frame Screws (5-7 kgf.cm)

123

Acetate Tape

Hooked

Tab

ASF Screw

(4-5 kgf.cm)

C.B.S(P4) 3x6 (8-10kgf.cm)

C.B.S 3x6 (5-7kgf.cm)

C.B.P 3x8 (5-7kgf.cm)

C.B.S 3x6 (5-7kgf.cm)

Acetate Tape