Service manual

EPSON Stylus Photo R340/350 Revision A
Disassembly and Assembly Disassembly 51
2.3.7 Removing the Stacker Assy.
 Illustration
Figure 2-17. Removing the Stacker Assy.
 Parts/Components must be removed to remove the Stacker Assy.
Paper Support Assy., Left Housing, Right Housing,
Panel Board Assy. (Panel Board and LCD Module), Upper Housing
 Disassembly Procedure
1. Release the shaft of the Stacker Shaft with a flat-blade screwdriver and pull
the left side of the Stacker Assy. toward you to remove the assy.
Stacker Shaft
Stacker Assy.
Stacker Paper Stoppers
Stacker Assy. (Center)
 The two Stacker Paper Stoppers must be securely affixed to the
ribs of the Stacker Assy.
Figure 2-18. Reattaching the Stacker Paper Stoppers
 Make sure to put the guide pin of the Stacker Assy. into the
positioning hole on the frame.
Figure 2-19. Reinstalling the Stacker Assy.
Rib
Guide Pin
Positioning Hole
Right Side of the Printer