Service manual

EPSON Stylus Photo R340/350 Revision A
Troubleshooting Troubleshooting 19
Table 1-7. Troubleshooting of Paper Out Error based on Observed Symptom
Occurrence
Timing
CR Position
Symptoms Failed Part Check Point Remedies
• Occurrence
Timing:
During
operation
• CR Position:
---
The LD Roller shaft rotates to feed
paper, but the Hopper does not operate.
ASF Assy. 1. Check the Hopper if it works properly during feeding
paper.
1. Reattach the Compression Spring 2.51
between the ASF Frame and the Hopper
properly.
The LD Roller shaft rotates properly, but
the paper is not fed at all.
Shaft Assy. Holder 1. Check the LD Roller surface if it is free of paper dust. 1. Wipe the paper dust on the LD Roller with a
clean cloth moistened with alcohol.
* If the problem still occurs after performing
the above remedies, replace the LD Roller
with a new one.
Compression
Spring 2.51
Hopper
LD Roller