Service manual

EPSON Stylus Photo R260/R265/R270, R360/R380/R390 Revision B
Disassembly/Assembly Removing Exterior Parts/Components 67
Figure 4-18. Disengaging the Hook and Tabs
4. Remove the Left Housing in the same manner.
 Removing the USB Housing
1. Push part to disengage the hook and slide the USB Housing upward to
remove it.
Figure 4-20. Removing the USB Housing
Before screwing the Right Housing and Left Housing, make sure
the two hooks on each housing shown below are properly inserted
into the holes of the Upper Housing.
Figure 4-19. Reinstalling the Right/Left Housings
Hook
: Tab
Left Housing
Holes on the
Upper Housing
Hook
Removal Direction
USB Housing
Hook
Press to
disengage the
hook
[Left side]