Service manual

EPSON Stylus Photo R260/R265/R270, R360/R380/R390 Revision B
Disassembly/Assembly Overview 64
4.1.10 Disassembly/Assembly Procedures
The flowchart below lists the step-by-step disassembly procedures. When disassembling each unit, refer to the page number shown in the figure.
Flowchart 4-1. R260/R265/R270 & R360/R380/R390 Disassembly Flowchart
START
Upper Housing (p.68)
Front Housing (p.73)
Disassembling the
Main Board Unit
(p.80)
Disassembling the
Panel Unit (p.83)
CDR Guide Detection
Assy (p.111)
Printhead (p.91)
Waste Ink Pad (p.94)
P/S Assy (p.94)
Stacker Assy (p.95)
Panel Unit (p.69)
Upper Paper Guide
(p.108)
Paper Support (p.65)
Printer Cover (p.65)
Front Cover (p.66)
Right Housing / Left Housing /
USB Housing (p.66)
APG Unit (p.90)
CR Scale (p.89)
Ink System (p.97)
CR Motor (p.99)
EJ Frame Assy (p.100)
ASF Unit (p.104)
Front Paper Guide
Assy/APG Sensor
Assy (p.109)
PF Encoder / PF Scale
/ PF Motor (p.102)
Right Front Housing /
Left Front Housing
(p.72)
EMI Frame / Waste
Ink Tray (p.70)
Removing the USB
Board (R260/R265/
R270 only) (p.76)
Removing the Main
Board Unit (p.78)
Removing the Printer
Mechanism (p.87)
Middle Housing (p.86)
Removing the Card
Board (R360/R380/
R390 only) (p.82)
CR Unit (p.105)
shows the procedures different between the R260/R265R270 and
R360/R380/R390. Unless otherwise specified, the other procedures
are the same and illustrated using the R360/R380/R390.