Service manual

EPSON Stylus Photo R260/R265/R270, R360/R380/R390 Revision B

Disassembly/Assembly Overview 62

4.1.7 How to Unlock the Carriage

 Unlocking the carriage is required for disassembly of some parts or components.

Carry out any of the following operations to unlock the carriage and move the

carriage to other than its home position.

 Power the printer and turn it off forcedly by disconnecting the power cable

when the CR Unit is unlocked and moved away from the home position.

 Turn the EJ Roller gear on the left side of the printer in the direction of the

arrow until the carriage is unlocked.

Figure 4-8. How to Unlock the Carriage

4.1.8 Sharp Metal Edges (Danger!)

Figure 4-9. Sharp Metal Edges

C A U T I O N

Be extremely careful not to damage the EJ Roller gear. Extra care

must be taken to avoid injury from sharp metal edges.

Locked

Carriage Lock

Unlocked

Carriage Lock

Turn this gear

[Left side]

PF Roller Gear

EJ Roller Gear

C A U T I O N

During disassembly/reassembly work on the Stylus R260/R265/

R270 and R360/R380/R390, extra care must be taken to avoid

injury from sharp metal edges, especially from the edges shown

below.

Cable Holder Frame

Front Frame

EMI Frame

Lower Housing