Service manual

EPSON Stylus Photo R260/R265/R270, R360/R380/R390 Revision B
Troubleshooting Troubleshooting by Error Message 47
Table 3-11. Troubleshooting for CDR Guide Error
Occurrence
Timing
Symptom Failed Part Check Point Remedy Reference
When printing on
CDs/DVDs
The CDR Guide is set correctly, but
the error occurs.
CDR Guide
Detection ASSY
1. Is the CDR Guide Detection Assy cable not
connected to the Main Board?
1. Connect the cable to the Main Board.
 R360/R380/R390
Main Board: CN9
 R260/R265/R270
Main Board: CN4
4.5.15 "CDR
Guide Detection
Assy"(p.111)
2. Is the CDR Guide Sensor damaged? 2. Replace the CDR Guide Detection
Assy.
3. Is the CDR Guide Detection Assy cable broken? 3. Replace the CDR Guide Detection
Assy.
CDR Guide Lever
1. Is the CDR Guide Lever not installed correctly? 1. Install the CDR Guide Lever correctly.
4.5.6 "Stacker
Assy"(p.95)
Main Board
1. Is there any chipped or broken elements on the
Main Board?
1. Replace the Main Board.
4.3.2
"Removing the
Main Board
Unit"(p.78)