Service manual

EPSON Stylus Photo R260/R265/R270, R360/R380/R390 Revision B
Troubleshooting Troubleshooting by Error Message 45
Table 3-10. Troubleshooting for CDR Tray Error
Occurrence
Timing
Symptom Failed Part Check Point Remedy Reference
When printing on
CDs/DVDs
The CDR Tray is set to the printer,
but the error occurs.
CDR Tray
1. Has the part of the CDR Tray that contacts with
the CDR Tray Sensor become cracked?
1. Replace the CDR Tray.
-
CDR Guide
Detection ASSY
1. Is the CDR Guide Detection Assy cable not
connected to the Main Board?
1. Connect the cable to the Main Board.
 R360/R380/R390
Main Board: CN9
 R260/R265/R270
Main Board: CN4
4.5.15 "CDR
Guide Detection
Assy"(p.111)
2. Is the CDR Tray Sensor damaged? 2. Replace the CDR Guide Detection
Assy.
The CDR Tray center detection
sequence is interrupted, and the tray
is ejected.
CDR Tray
1. Is there any paper dust or foreign matter on the
white mark on the CDR Tray?
1. Remove any dust or foreign matter from
the tray.
-
Contact point
CDR Tray
White Mark