Service manual

EPSON Stylus Photo R260/R265/R270, R360/R380/R390 Revision B
Troubleshooting Troubleshooting by Error Message 44
Any time
The PF Motor drive force is not
transmitted to the LD Roller.
ASF Assy
3. Is the clutch damaged? 3. Replace the ASF Unit.
4.5.11 "ASF
Unit"(p.104)
4. Is the Compression Spring 2.36 of the Change
Lever detached?
4. Replace the ASF Unit. For R360/R380/
R390, replace the Change Lever.
The LD Roller shaft is not set in the
ASF home position, and paper is
always fed from the ASF Assy.
ASF Assy
1. Is the edge of the Change Lever chipped or
broken?
1. Replace the ASF Unit. For R360/R380/
R390, replace the Change Lever.
Table 3-9. Troubleshooting for No Paper Error
Occurrence
Timing
Symptom Failed Part Check Point Remedy Reference
LD Roller
Clutch
ASF
Compression Spring2.36
Change Lever
CR Motor
Edge of Change Lever