Service manual
EPSON Stylus Photo R260/R265/R270, R360/R380/R390 Revision B
Product description Specifications Common to the Models 21
1.7 Specifications Common to the Models
1.7.1 Electric Specifications
Note : When the printer is kept idle for 3 minutes, it goes into standby mode that saves current
to the motors.
Note *1: When performing a print job sent from a PC. Printing Letter Pattern on A4 sized
plain paper (the test conforms to ISO/IEC10561).
1.7.2 Environmental Condition
Note *1: Must be within the range shown in Fig.1-6.
*2: Non-operating with unpacked.
*3: Must be less than 1 month at temperature 40
ºC.
Figure 1-6. Temperature/Humidity Range
1.7.3 Durability
Printer: 16,000 pages (A4/Letter) or 5 years whichever is faster
Printhead: 6 billion shots per nozzle or 5 years whichever is faster
1.7.4 Noise Level
R260/R265/R270: Approx. 42 dB (when copying according to ISO7779)
R360/R380/R390: Max. 42 dB (during standalone printing according to ISO7779)
Table 1-15. Electric Specifications
Item 100-120V model 220-240V model
Rated voltage 100-120 VAC 220-240 VAC
Input voltage range 90 - 132 VAC 198-264 VAC
Rated current
0.6 A
R260/265/270: max. 0.9A
R360/380/390: max. 1.1A
0.3 A (max. 0.5A)
Rated frequency 50 - 60 Hz
Input frequency
range
49.5 - 60.5 Hz
Dielectric strength
R260/265/270: 3000 V for 1 minute
R360/380/390: AC 1000 Vrms for 1 min., AC 1200 Vrms for 1 sec.
Energy conservation Energy Star compliant
Safety standard
UL60950
CSA22.2 No.60950
EN60950
EMC
FCC part 15 subpart B Class B
CAN/CSA-CEI/IEC
CISPR 22 Class B
EN 55022 (CISPR Pub.22) Class B
EN 61000-3-2
EN 61000-3-3
EN 55024
AS/NZS CISPR22 Class B
Table 1-16. Power Consumption
Printer status Model Name 100-120V model 220-240V model
Printing*
1
R260/R265/R270 Approx. 12W
R360/R380/R390 Approx. 17W
Sleep mode
R260/R265/R270 Approx. 1.1W Approx. 1.2W
R360/R380/R390 Approx. 4.5W Approx. 5.0W
Power off mode
R260/R265/R270
Approx. 0.2W Approx. 0.4W
R360/R380/R390
Table 1-17. Environmental Condition
Item Operating Storage*
2
Temperature
*1
10 to 35 °C -20 to 40 °C*
3
Humidity (no condensation)
*1
20 to 80%, RH 5 to 85%, RH
Impact resistance 1 G, 1 x 10
-3
seconds 2 G, 2 x 10
-3
seconds
Vibration resistance 0.15G 0.50G