Service manual

EPSON Stylus Photo R260/R265/R270, R360/R380/R390 Revision B
Disassembly/Assembly Disassembly of the Printer Mechanism 106
3. Disengage the end of the Spring (2) from the hook, and the other end from the
slit of the CR shaft, and remove the Spring (2).
4. Remove the washer, and remove the Right PG Cam.
Figure 4-146. Removing the CR Unit (2)
5. Hold the CR Unit from the bottom and lift up the CR Shaft, release from the
bushing in the (1) (2) order, and remove the CR Unit with the Shaft from the
Main Frame.
Figure 4-147. Removing the CR Unit (3)
6. Remove the CR Shaft from the CR Unit.
Figure 4-148. Removing the CR Unit (4)
7. Remove the Timing Belt from the CR Unit.
Figure 4-149. Removing the CR Unit (5)
8. Disconnect the FFC from the CR Encoder connector, pull out the FFC from
the slit of the CR Unit, and remove the Head FFC.
Figure 4-150. Removing the CR Unit (6)
CR Shaft
Washer
Right PG Cam
Spring (2)
Removal Direction
Hook
1
2
CR Shaft
CR Unit
Bushing
Bushing
CR ShaftCR Shaft
CR Unit
Timing Belt
CR Unit
Head FFC
CR Unit